Share:


Seismic vulnerability of reinforced concrete bridges in Pakistan

    Muhammad Khalid Hafiz Affiliation
    ; Qaiser-uz-Zaman Khan Affiliation
    ; Sohaib Ahmad Affiliation

Abstract

Different researchers have performed seismic hazard assessment studies for Pakistan using faults sources which differ from Building Code of Pakistan (BCP 2007) with diverse standard deviations. The results of seismic hazard studies indicate that BCP requires gross revision considering micro and macro level investigations. The recent earthquakes in Pakistan also damaged bridge structures and some studies have been conducted by different researchers to investigate capacity of existing bridges.
The most of bridge stock in Pakistan has been designed assuming seismic loads as 2%, 4% and 6% of dead loads following West Pakistan Code of Practice for Highway Bridges. The capacity of eight selected real bridges, two from each seismic zone 2A, 2B, 3 & 4 is checked against BCP demands. Static and dynamic analyses were performed and the piers were checked for elastic limits. It is established that piers are on lower side in capacity and the bridges in zone 2A are generally less vulnerable. Whereas the bridges in zone 2B, 3 and 4 are vulnerable from medium to very high level. Hence, an in-depth analytical vulnerability study of bridge stock particularly in high-risk zone needs to be conducted on priority and appropriate seismic retrofitting schemes need to be proposed.

Keyword : hazard, vulnerability, seismic, bridges, piers, tectonics, Building Code of Pakistan

How to Cite
Hafiz, M. K., Khan, Q.- uz-Z., & Ahmad, S. (2022). Seismic vulnerability of reinforced concrete bridges in Pakistan. Journal of Civil Engineering and Management, 28(2), 93–105. https://doi.org/10.3846/jcem.2022.15854
Published in Issue
Jan 14, 2022
Abstract Views
821
PDF Downloads
762
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Ali, S. M., Khan, A. N., Rehman, S., & Reinhorn, A. M. (2011). A survey of damages to bridges in Pakistan after the major earthquake of 8 October 2005. Earthquake Spectra, 27(4), 947–970. https://doi.org/10.1193/1.3650477

American Concrete Institute. (2004). Building code requirements for structural concrete and commentary (ACI 318-05). USA.

American Institute of Steel Construction. (2005). Seismic provisions for structural steel buildings (ANSI/AISC 341-05). USA.

American Society of Civil Engineers. (1994). Minimum design loads for buildings and other structures (ANSI/ASCE 7-93). USA.

American Society of Civil Engineers. (2006). Minimum design loads for buildings and other structures (ASCE/SEI 7-05). USA.

Earthquake Reconstruction and Rehabilitation Authority. (2006a). Annual review 2005–2006. Prime Minister Secretariat (Public), Islamabad, Pakistan.

Earthquake Reconstruction and Rehabilitation Authority. (2006b). “Build back better” reconstruction and rehabilitation strategy, transport (roads & bridges) sector. Prime Minister Secretariat (Public), Islamabad, Pakistan.

Economic Adviser’s Wing, Finance Division. (2019). Pakistan economic survey 2018–2019. Government of Pakistan, Islamabad, Pakistan.

Global Seismic Hazard Assessment Program. (1999). http://www.seismo.ethz.ch/GSHAP/

Hashash, Y. M. A., Kim, B., Olson, S. M., & Ahmad, I. (2012). Seismic hazard analysis using discrete faults in Northwestern Pakistan: Part I – methodology and evaluation. Journal of Earthquake Engineering, 16, 963–994. https://doi.org/10.1080/13632469.2012.681423

Highway Department, Government of West Pakistan Lahore. (1967). Code of practice, highway bridges.

Information Management and Mine Action Programs. (2013). Earthquake 2013 atlas of Balochistan: Districts Awaran, Kech, Panjgur, Khuzdar, & Washuk. Islamabad, Pakistan.

International Conference of Building Officials. (1997). Uniform building code. California, USA.

Khan, R. A., Kumar, M., Ahmed, M., Rafi, M. M., & Lodi, S. H. (2015). Earthquake damage assessment of bridges in Karachi. NED University Journal of Research, 12(3), 45–61.

Khan, S. A., Pilakoutas, K., Hajirasouliha, I., Guadagnini, M., Mulyani, R., Ahmadi, R., & Elwaeli, W. (2017). Seismic risk assessment for developing countries: Pakistan as a case study. Earthquake Engineering and Engineering Vibration, 17(4), 787–804. https://doi.org/10.1007/s11803-018-0476-3

Ministry of Housing and Works. (2007). Building code of Pakistan (BCP). Government of Pakistan, Islamabad.

MonaLisa, Khwaja, A. A., & Jan, M. Q. (2007). Seismic hazard assessment of the NW Himalayan Fold-and-Thrust Belt, Pakistan, using probabilistic approach. Journal of Earthquake Engineering, 11, 257–301. https://doi.org/10.1080/13632460601031243

National Disaster Management Authority. (2019). Mirpur Earthquake 2019 (Situation report No. 08). Islamabad, Pakistan.

Pakistan Meteorological Department, & NORSAR (Norway). (2006). Seismic hazard analysis and zonation for the northern areas of Pakistan and Kashmir.

Pakistan Meteorological Department, & NORSAR (Norway). (2007). Seismic hazard analysis and zonation for Pakistan, Azad Jammu and Kashmir.

Pakistan Meteorological Department. (2019). Seismicity map. National Seismic Monitoring Centre Islamabad, Pakistan. http://seismic.pmd.gov.pk/seismicity-maps.php

Quittmeyer, R., & Jacob, K. H. (1979). Historical and modern seismicity of Pakistan, Afghanistan, northwestern India, and southeastern Iran. Bulletin of the Seismological Society of America, 69(3), 773–823.

Rafi, Z., Ahmed, N., Ur-Rehman, S., Azeem, T., & Abd el-aal, A. e. K. (2013). Analysis of Quetta-Ziarat earthquake of 29 October 2008 in Paki-stan. Arabian Journal of Geosciences, 6, 1731–1737. https://doi.org/10.1007/s12517-011-0485-2

Shah, B. A., Sadiq, M. M., Memon, S. A., & Rehman, S. K. U. (2021). Assessment of the seismicity of Peshawar region in line with the historical data and modern building codes (ASCE-07 & IBC-2006). Journal of Earthquake Engineering, 25(9), 1826–1850. https://doi.org/10.1080/13632469.2019.1605315

USGS Earthquake Hazards Program. (2020). Maps. https://earthquake.usgs.gov/earthquakes/eventpage/usb000jyiv/executive

Waseem, M., & Spacone, E. (2017). Fragility curves for the typical multi-span simply supported bridges in northern Pakistan. Structural Engineering & Mechanics, 64(2), 213–223.

Waseem, M., Khan, M. A., & Khan, S. (2019). Seismic sources for southern Pakistan and seismic hazard assessment of Karachi. Natural Hazards, 99(1), 511–536. https://doi.org/10.1007/s11069-019-03755-5

Waseem, M., Khan, S., & Khan, M. A. (2020). Probabilistic seismic hazard assessment of Pakistan territory using an aerial source model. Pure and Applied Geophysics, 177, 3577–3597. https://doi.org/10.1007/s00024-020-02455-7

Water and Power Development Authority. (2015). Simly dam project seismotectonics & seismic hazard analysis (Technical Report by Directorate of Seismic Studies office of the General Manager & Project Director Tarbela Dam Project, Vol. 1). Pakistan.

Zaman, S., Ornthammarath, T., & Warnitchai, P. (2012). Probabilistic seismic hazard maps for Pakistan. In 15th World Conference on Earthquake Engineering (pp. 8677–8687), Lisbon, Portugal.